Analog Sampling-Reconstruction Kit

                  ACT-01-Analog Sampling-Reconstruction Kit
  • Synchronized Sine waveform output of Frequency 1 KHz & 2 KHz.
  • Selectable sampling frequency of 2,4,8,16,32 KHz.
  • Sample circuit/output, sample & hold circuit/output
  • Switch selectable sampling Duty cycle of 0-90% in steps.
  • 2nd & 4th order Low pass filter.

 

PAM-PWM-PPM-Modulation-Demodulation Kit

                 ACT-02-PAM-PWM-PPM-Modulation-Demodulation Kit
  • Sine waveform output of 250Hz, 500Hz, 1 KHz, and 2 KHz
  • Selectable sampling clock of 4, 8, 16, 32 KHz.
  • Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output
  • PAM/PWM/PPM modulation & demodulation.
  • 4th order Low pass filter.

 

TDM-Pulse Amplitude Mod-Demod- Kit

                 ACT-03-TDM-Pulse Amplitude Mod-Demod- Kit
  • Sine waveform output of 250Hz, 500Hz, 1 KHz, and 2 KHz
  • Sampling rate of 32 KHz/channel, 8KHz. Channel Identification Signal.
  • DC source for Amplitude adjustments provided.
  • Four analog input channels for multiplexing/de-multiplexing.
  • Clock regeneration at receiver using PLL.
  • 4th order Butter worth Low pass.

 

TDM-Pulse Code Modulation Kit

                 ACT-04-TDM-Pulse Code Modulation Kit
  • Sine waveform output of 500Hz, 1 KHz
  • Two Nos. of variable DC source with Amplitude adjustments.
  • Fast (240 KHz/Channel approx)/ Slow (1Hz. /channel approx.).
  • Two Nos. of Input Channels..
  • Pseudo random sync. Code generator for FRAME Synchronization. .
  • PLL for Bit synchronization.

 

TDM-Pulse Code Modulation KIT

                 ACT-05-TDM-Pulse Code Modulation KIT
  • 2 Channel TDM Pulse Code Modulation Receiver.
  • Pseudo random sync. Code generator for FRAME Synchronization.
  • Receiver clock generation using PLL
  • Error Detection of None, Even, Odd, Hamming.
  • Error Correction using Hamming Code technique.
  • Two Nos. of 4th order butter worth Low pass filter.

 

Delta-Adaptive Delta-M-D-KIT

                 ACT-06-Delta-Adaptive Delta-M-D-KIT
  • Sine waveform output of 250Hz,500Hz, 1 KHz and 2 KHz
  • Switch selectable sampling clock of 8, 16, 32,64 KHz.
  • Delta modulation, Adaptive Delta modulation, CVSD modulation
  • M-law Com pander and Expander .
  • 2nd & 4th order Butter worth Low pass filter.

 

Data Conditioning Kit

                 ACT-7T-Data Conditioning Kit
  • Carrier Generator generating frequency of 2MHz (0°), 1MHz (0°) & 1MHz (180°)
  • NRZ(Level), NRZ(Mark), NRZ(Space), Biphase (Manchester),
    Biphase (Mark), Biphase (Space), URZ, AMI.
  • ASK modulation, FSK modulation, PSK modulation
  • Uni-polar to Bipolar conversion & Bipolar to Uni-polar conversion.

 

Data RE-Conditioning KIT

                 ACT-7R-Data RE-Conditioning KIT
  • NRZ(Level), NRZ(Mark), NRZ(Space), Bi-phase (Manchester), Bi-phase (Mark),
    Bi-phase (Space), URZ, AMI.
  • Rectifier Diode for ASK modulation, PLL Detector for FSK modulation,
    Square Loop Detector for PSK modulation .
  • Receiver Clock generated using PLL

 

BPSK-DPSK Modulation-Demodulation KIT

  • Provides synchronized Sine waveform output of 500KHz(0 deg.), 500KHz(180 deg.).
  • 8 bit variable NRZ-L pattern generated depending
    on the position of the 8-dit Data Switch provided.
  • Non Return to Zero-Level (NRZ-L).
  • BPSK modulation, DPSK modulation, DEPSK modulation.
  • Square Looping Technique used in Demodulation section.

 

QPSK-DQPSK Modulation Kit - 01

                 ADCT-02-QPSK-DQPSK Modulation Kit
  • Provides synchronized Sine waveform output of 500KHz(0 deg.),
    500KHz(90 deg.), 500KHz(180 deg.), 500KHz(270deg.).
  • Digit Pair (I & Q), differential encoding of I & Q bits.
  • DPSK modulation, DQPSK modulation.
  • Clock frequency of 250 KHZ BIT, BIT clock, word clock.
  • On board 8 bit variable NRZ-L pattern data simulator.

 

QPSK-DQPSK Modulation Kit - 02

                 ADCT-03-QPSK-DQPSK Modulation Kit
  • Dibit Pair (I & Q), differential encoding of I & Q bits.
  • DPSK Demodulation, DQPSK demodulation.
  • Receiver Clock generated by PLL method.

 

Base Band Digital Transmission Trainer

                 ADCT-04-Base Band Digital Transmission Trainer
  • Provides White Noise Source output.
  • selectable clock rate of 16, 32, 64, 128, 256, 512 KHz, and 1.024 MHz.
  • Four digit counter displayed on seven segment for BER measurement.
  • Four digit seven segment counting up to 9999 with LED for TC.
  • Pulse Amplitude Modulation technique is used .
  • Internal sampling clock: of 16 KHz to 1MHz.
  • 16 bit data pattern for scrambler/ unscrambler.

 

QAM-DQAM Modulation Trainer - 01

                 ADCT-05-QAM-DQAM Modulation Trainer
  • Provides synchronized Sine waveform output of 500KHz(0 deg.),
    500KHz(90 deg.), 500KHz(180 deg.),500KHz(270 deg.).
  • 24 bit variable NRZ-L pattern generated depending on the
    position of the three nos. of 8-dit Data Switch provided.
  • Non Return to Zero-Level (NRZ-L), Tribit encoded data (I ,Q & C),
    Differential Encoded I & Q Bits.
  • Quadrature amplitude modulation, differentially quadrature amplitude modulation.

 

QAM-DQAM Modulation Trainer - 02

                 ADCT-06-QAM-DQAM Modulation Trainer
  • Receiver clock generated using PLL method.
  • Non Return to Zero-Level (NRZ-L), Tribit Decoded data (I ,Q & C),
    Differential Decoded I & Q Bits.
  • Quadrature amplitude demodulation, differentially quadrature amplitude demodulation .
  • QAM/DQAM demodulation using PLL and envelop detectors.

 

DPCM-ADPCM Modulation-Demodulation Trainer

                 ADCT-07-DPCM-ADPCM Modulation-Demodulation Trainer
  • Provides Sine waveform output using IC 74164.
  • Clock of frequencies ?64 KHz, 128 KHz, 256 KHz and 512KHz.
  • Sampling Clock Frequency of 16 KHz and Amplitude of 5V.
  • DPCM modulation using sampler, quantizer and linear predictor.
  • DPCM demodulation using linear predictor, Integrator and Low pass Filter.

 

 

Digital Communication Trainers
aaaaaaaaaaaaiii